STAINLESS STEEL MICROMETER CASE TRIMMER - STAINLESS CASE TRIMMER WITH MICROMETER ONLY

STAINLESS STEEL MICROMETER CASE TRIMMER – STAINLESS CASE TRIMMER WITH MICROMETER ONLY

Description

L.E. WILSON INC. STAINLESS STEEL MICROMETER CASE TRIMMER

The L.E. Wilson Stainless Micro Trimmer enables the user to easily make quick trim adjustments in .001" increments. The compact micrometer unit is directly incorporated into the stop bearing. The L.E. Wilson trimmer uses case holders that hold the case neck by the body taper and utilizes no pilots during the case trimming operation. The trimmer utilizes a rail system that the case holders, cutter housing, and adjustment stop sits on providing perfect alignment with each other. Trimmer case holders are available separately.

FEATURES

Trims .17 to .45 Caliber Cases
New Stainless long lasting finish with Micrometer adjustment
Larger stop screw adjustment from 3/8" (old) to 1/2" (new) with increased width on Stop Nut. Makes for a firm stop. Coated with black oxide for a long lasting durable finish.
Major adjustment in the Stop Screw and fine adjustment by increments of .001 with the Micrometer
NEW Black Anodized revolving crank handle – Replaces SS Crank and Jam nut
Made in the U.S.A. with American Steel
Power Adapter compatible

Description

Original price was: $183.92.Current price is: $139.34.

L.E. WILSON INC. STAINLESS STEEL MICROMETER CASE TRIMMER

The L.E. Wilson Stainless Micro Trimmer enables the user to easily make quick trim adjustments in .001" increments. The compact micrometer unit is directly incorporated into the stop bearing. The L.E. Wilson trimmer uses case holders that hold the case neck by the body taper and utilizes no pilots during the case trimming operation. The trimmer utilizes a rail system that the case holders, cutter housing, and adjustment stop sits on providing perfect alignment with each other. Trimmer case holders are available separately.

FEATURES

Trims .17 to .45 Caliber Cases
New Stainless long lasting finish with Micrometer adjustment
Larger stop screw adjustment from 3/8" (old) to 1/2" (new) with increased width on Stop Nut. Makes for a firm stop. Coated with black oxide for a long lasting durable finish.
Major adjustment in the Stop Screw and fine adjustment by increments of .001 with the Micrometer
NEW Black Anodized revolving crank handle – Replaces SS Crank and Jam nut
Made in the U.S.A. with American Steel
Power Adapter compatible

3 in stock

SKU 749007641 Category Case Trimming

Description
Additional information

Description

L.E. WILSON INC. STAINLESS STEEL MICROMETER CASE TRIMMER

The L.E. Wilson Stainless Micro Trimmer enables the user to easily make quick trim adjustments in .001" increments. The compact micrometer unit is directly incorporated into the stop bearing. The L.E. Wilson trimmer uses case holders that hold the case neck by the body taper and utilizes no pilots during the case trimming operation. The trimmer utilizes a rail system that the case holders, cutter housing, and adjustment stop sits on providing perfect alignment with each other. Trimmer case holders are available separately.

FEATURES

Trims .17 to .45 Caliber Cases
New Stainless long lasting finish with Micrometer adjustment
Larger stop screw adjustment from 3/8" (old) to 1/2" (new) with increased width on Stop Nut. Makes for a firm stop. Coated with black oxide for a long lasting durable finish.
Major adjustment in the Stop Screw and fine adjustment by increments of .001 with the Micrometer
NEW Black Anodized revolving crank handle – Replaces SS Crank and Jam nut
Made in the U.S.A. with American Steel
Power Adapter compatible

Additional information

Weight	1.5 lbs

Frequently Asked Questions

Are these brass cases and reloading components factory-new or once-fired? +

We stock both premium factory-new components and high-quality once-fired brass. Please check the specific product listing title and description carefully; once-fired brass is fully inspected, but we always recommend resizing and inspecting prior to priming and powder charging.

Will this case trimmer gauge or die set work with my progressive press setup? +

Our standard reloading dies and case length trimmer accessories utilize industry-standard threads (typically 7/8"-14) compatible with major single-stage, turret, and progressive presses like RCBS, Hornady, Lee Precision, and Dillon. Caliber-specific trim gauges must match your exact brass caliber.

Do you enforce shipping restrictions on powder, primers, or live ammunition? +

Yes. Non-hazardous reloading equipment (dies, case length trimmers, gauges, and unprimed brass) ships via standard ground carriers with no extra fees. Any orders containing smokeless powders or primers will incur standard federal HazMat handling fees and cannot be shipped via air transportation.

How can I track my shipment to ensure delivery safety? +

Precision reloading gear is valuable, so all orders are shipped with tracking enabled. As soon as your package is dispatched from our inventory warehouse, a tracking number will be emailed to you. You can monitor your shipment directly on our Track Order page using your unique Order ID.

Can I return precision measuring tools or die components if they don’t fit? +

We accept returns on unused, unaltered tools, case preparation equipment, and unopened component boxes within 30 days of item delivery. Due to safety and strict quality control on the reloading bench, we absolutely cannot accept returns on opened packs of primers, smokeless powder, or processed brass casings.

You may also like...