Original price was: $329.99.$247.49Current price is: $247.49.
Zaffiri Precision ZPS.3 slide for Glock 19 Gen 3.
Zaffiri Precision’s single billet 17-4 stainless steel slides are made with tight tolerances that allow an increase in accuracy and performance. 100% American made and manufactured at Zaffiri Precision’s facility in Largo, FL. These are among the best aftermarket slides available for Glock. This slide is pre-cut and pre-coated and no changes can be made.
Compatible with and designed to fit Glock 19 – Gen 3 frame. Also compatible with earlier Gen 1 and Gen 2 models.
This slide is compatible with other aftermarket frames like the SCT 19 | P80 PFC9 | PSA Dagger
SPECS
*IMPORTANT – This slide is NOT ported compatible. ZP PORTED barrels are only compatible with the ZPS.P and ZPS.4 slides.
No parts will be assembled.
Optics Cut (Red Dot Footprint):
Trijicon RMR / SRO, Holosun 407c / 507c, and other popular “RMR footprint” optics – mounting position is in front of the factory location of the rear sight (dovetail remains behind the optic cut). Slide comes with proper mounting screws and a black anodized cover plate specific to the optic cut. You must use the screws Zaffiri Preicions provides. Blue Loctite is recommended for proper sight retention. Do not exceed optic manufacturer’s screw torque specifications.
DISCLAIMER: This product is not manufactured, authorized, endorsed, or warrantied by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. Zaffiri Precision is not affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components.
1 in stock
Zaffiri Precision ZPS.3 slide for Glock 19 Gen 3.
Zaffiri Precision’s single billet 17-4 stainless steel slides are made with tight tolerances that allow an increase in accuracy and performance. 100% American made and manufactured at Zaffiri Precision’s facility in Largo, FL. These are among the best aftermarket slides available for Glock. This slide is pre-cut and pre-coated and no changes can be made.
Compatible with and designed to fit Glock 19 – Gen 3 frame. Also compatible with earlier Gen 1 and Gen 2 models.
This slide is compatible with other aftermarket frames like the SCT 19 | P80 PFC9 | PSA Dagger
SPECS
*IMPORTANT – This slide is NOT ported compatible. ZP PORTED barrels are only compatible with the ZPS.P and ZPS.4 slides.
No parts will be assembled.
Optics Cut (Red Dot Footprint):
Trijicon RMR / SRO, Holosun 407c / 507c, and other popular “RMR footprint” optics – mounting position is in front of the factory location of the rear sight (dovetail remains behind the optic cut). Slide comes with proper mounting screws and a black anodized cover plate specific to the optic cut. You must use the screws Zaffiri Preicions provides. Blue Loctite is recommended for proper sight retention. Do not exceed optic manufacturer’s screw torque specifications.
DISCLAIMER: This product is not manufactured, authorized, endorsed, or warrantied by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. Zaffiri Precision is not affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components.
| Weight | .5 lbs |
|---|---|
| Cartridge | APP_9 mm Luger |
| Model | Gen 3, Gen 1, 19, Gen 2 |
| Make/Model | Glock, Gen 3, Glock, Gen 2, Glock, 19, Glock, Gen 1 |
| Make | Glock |
| Finish | Olive Drab Green |
| Sights | RMR, Holosun 507C, Holosun 407C |
| Style | Stripped |
We stock both premium factory-new components and high-quality once-fired brass. Please check the specific product listing title and description carefully; once-fired brass is fully inspected, but we always recommend resizing and inspecting prior to priming and powder charging.
Our standard reloading dies and case length trimmer accessories utilize industry-standard threads (typically 7/8"-14) compatible with major single-stage, turret, and progressive presses like RCBS, Hornady, Lee Precision, and Dillon. Caliber-specific trim gauges must match your exact brass caliber.
Yes. Non-hazardous reloading equipment (dies, case length trimmers, gauges, and unprimed brass) ships via standard ground carriers with no extra fees. Any orders containing smokeless powders or primers will incur standard federal HazMat handling fees and cannot be shipped via air transportation.
Precision reloading gear is valuable, so all orders are shipped with tracking enabled. As soon as your package is dispatched from our inventory warehouse, a tracking number will be emailed to you. You can monitor your shipment directly on our Track Order page using your unique Order ID.
We accept returns on unused, unaltered tools, case preparation equipment, and unopened component boxes within 30 days of item delivery. Due to safety and strict quality control on the reloading bench, we absolutely cannot accept returns on opened packs of primers, smokeless powder, or processed brass casings.
