SINGLE SHOT BRASS 44 MAGNUM/44 SPECIAL SINGLE SHOT RIFLE
The centerfire single-shot rifle has an extensive history among hunters looking for a dependable and accurate game-getter without spending more than necessary for good quality and basic functionality. Henry Repeating Arms is proud to offer this premium line of break-action one-shooters.
Available with a highly polished finish on hardened brass frames, these elegantly simple rifles feature 22” round barrels and a fully adjustable folding leaf rear sight paired with a brass bead front sight. For those who prefer magnified optics, the rifles are drilled and tapped to mount a base. Despite its simplicity, the Henry Single Shot Rifle does not cut corners with the quality of the materials, so the furniture is genuine American walnut. This brass version has a straight English wrist and brass buttplate. Instead of flinging spent brass all over the place, these rifles feature a non-ejecting extractor, making it easier to get in and out of the field without leaving a trace.
These rifles use a familiar locking lever on top of the frame, behind the external hammer spur, to break the barrel open. Henry added their touch here, though- the lever can be pivoted either left or right from its center position to unlock, which works well for both left and righties. The action has no external manual safety; it uses a rebounding hammer that can’t touch the firing pin unless the trigger is deliberately pulled and an interlock system that doesn’t allow the barrel to open if the hammer’s cocked or the barrel to close if the hammer’s cocked while it’s open. Quick to load or unload, safe to carry, and simple to operate. That’s what it’s all about.
For those who prefer the sport and challenge of hunting with only one round on board, this no-frills approach to a premium single-shot rifle is the perfect choice. While some might consider something with a 1-round capacity an entry-level proposition, these rifles are built to the same high standards as all of our fine centerfire repeating rifles.
SPECIFICATIONS:
Original price was: $590.99.$534.99Current price is: $534.99.
SINGLE SHOT BRASS 44 MAGNUM/44 SPECIAL SINGLE SHOT RIFLE
The centerfire single-shot rifle has an extensive history among hunters looking for a dependable and accurate game-getter without spending more than necessary for good quality and basic functionality. Henry Repeating Arms is proud to offer this premium line of break-action one-shooters.
Available with a highly polished finish on hardened brass frames, these elegantly simple rifles feature 22” round barrels and a fully adjustable folding leaf rear sight paired with a brass bead front sight. For those who prefer magnified optics, the rifles are drilled and tapped to mount a base. Despite its simplicity, the Henry Single Shot Rifle does not cut corners with the quality of the materials, so the furniture is genuine American walnut. This brass version has a straight English wrist and brass buttplate. Instead of flinging spent brass all over the place, these rifles feature a non-ejecting extractor, making it easier to get in and out of the field without leaving a trace.
These rifles use a familiar locking lever on top of the frame, behind the external hammer spur, to break the barrel open. Henry added their touch here, though- the lever can be pivoted either left or right from its center position to unlock, which works well for both left and righties. The action has no external manual safety; it uses a rebounding hammer that can’t touch the firing pin unless the trigger is deliberately pulled and an interlock system that doesn’t allow the barrel to open if the hammer’s cocked or the barrel to close if the hammer’s cocked while it’s open. Quick to load or unload, safe to carry, and simple to operate. That’s what it’s all about.
For those who prefer the sport and challenge of hunting with only one round on board, this no-frills approach to a premium single-shot rifle is the perfect choice. While some might consider something with a 1-round capacity an entry-level proposition, these rifles are built to the same high standards as all of our fine centerfire repeating rifles.
SPECIFICATIONS:
4 in stock
SINGLE SHOT BRASS 44 MAGNUM/44 SPECIAL SINGLE SHOT RIFLE
The centerfire single-shot rifle has an extensive history among hunters looking for a dependable and accurate game-getter without spending more than necessary for good quality and basic functionality. Henry Repeating Arms is proud to offer this premium line of break-action one-shooters.
Available with a highly polished finish on hardened brass frames, these elegantly simple rifles feature 22” round barrels and a fully adjustable folding leaf rear sight paired with a brass bead front sight. For those who prefer magnified optics, the rifles are drilled and tapped to mount a base. Despite its simplicity, the Henry Single Shot Rifle does not cut corners with the quality of the materials, so the furniture is genuine American walnut. This brass version has a straight English wrist and brass buttplate. Instead of flinging spent brass all over the place, these rifles feature a non-ejecting extractor, making it easier to get in and out of the field without leaving a trace.
These rifles use a familiar locking lever on top of the frame, behind the external hammer spur, to break the barrel open. Henry added their touch here, though- the lever can be pivoted either left or right from its center position to unlock, which works well for both left and righties. The action has no external manual safety; it uses a rebounding hammer that can’t touch the firing pin unless the trigger is deliberately pulled and an interlock system that doesn’t allow the barrel to open if the hammer’s cocked or the barrel to close if the hammer’s cocked while it’s open. Quick to load or unload, safe to carry, and simple to operate. That’s what it’s all about.
For those who prefer the sport and challenge of hunting with only one round on board, this no-frills approach to a premium single-shot rifle is the perfect choice. While some might consider something with a 1-round capacity an entry-level proposition, these rifles are built to the same high standards as all of our fine centerfire repeating rifles.
SPECIFICATIONS:
| Weight | 8.55 lbs |
|---|---|
| Cartridge | AWW_44 Special, AVV_44 Magnum |
| Make/Model | Henry, Single Shot |
| Magazine Included | None |
| Magazine Type | None |
| Model | Single Shot |
| Capacity | 1-Round |
| Stock Material | Walnut |
| Front Sight | Bead |
| Finish | American Walnut |
| Make | Henry |
| Action Type | Single Shot |
| Weight | 7.14 lbs |
| Length | 37.5'' |
| Barrel Length | 22'' |
| Rear Sight | Adjustable |
| Muzzle | Non-Threaded |
We stock both premium factory-new components and high-quality once-fired brass. Please check the specific product listing title and description carefully; once-fired brass is fully inspected, but we always recommend resizing and inspecting prior to priming and powder charging.
Our standard reloading dies and case length trimmer accessories utilize industry-standard threads (typically 7/8"-14) compatible with major single-stage, turret, and progressive presses like RCBS, Hornady, Lee Precision, and Dillon. Caliber-specific trim gauges must match your exact brass caliber.
Yes. Non-hazardous reloading equipment (dies, case length trimmers, gauges, and unprimed brass) ships via standard ground carriers with no extra fees. Any orders containing smokeless powders or primers will incur standard federal HazMat handling fees and cannot be shipped via air transportation.
Precision reloading gear is valuable, so all orders are shipped with tracking enabled. As soon as your package is dispatched from our inventory warehouse, a tracking number will be emailed to you. You can monitor your shipment directly on our Track Order page using your unique Order ID.
We accept returns on unused, unaltered tools, case preparation equipment, and unopened component boxes within 30 days of item delivery. Due to safety and strict quality control on the reloading bench, we absolutely cannot accept returns on opened packs of primers, smokeless powder, or processed brass casings.
