Original price was: $224.99.$174.25Current price is: $174.25.
M5 (.308) ATLAS R-ONE M-LOK HANDGUARD
Aero is excited to announce clear anodize parts and components! These parts feature a Type 3 hard coat finish that is applied without any dye during the anodizing process. Something to note about these is color variance between different materials- long story short 7000 series aluminum (receivers, chassis center sections, chassis stocks) show up with a more gold/yellow hue; whereas 6000 series aluminum (handguards) anodizes a more slate grey color. What these color variations leave you with is a visually appealing contrast that has gained a cult following over the years. Clear anodize being as light as it is also makes an amazing base for your next rattle can finish if you are into that type of thing!
NOTE: This part features a colored anodized finish. These finishes are held to different aesthetic standards than parts finished in black anodizing or Cerakote. The lighter coloring allows certain aesthetic marks on the material to be visible through the finish. Some may show more or fewer signs of these defects, but the parts are guaranteed to be quality and in spec. There are also slight color variances between different materials when colored anodizing is applied. For more information on colored anodizing visit our Knowledge Center.
ATLAS
The new Aero Taper Lock Attachment System (ATLAS) is both functional and aesthetically pleasing. It features 2 mirrored tapered locking nuts that provide evenly distributed clamping pressure across a custom engineered barrel nut with use of a turnbuckle screw. A ratcheting detent further secures the design while providing positive registration during installation. By design, the even pressure of the ATLAS system avoids distortion of the handguard often seen with current applications during installation.
All hardware mounting parts are included with the purchase of an ATLAS Handguard.
Lightweight By Design
Features:
ATLAS Handguards are designed to match seamlessly with Aero’s M4E1 Threaded Upper Receivers. Additionally, they are compatible with any Mil-Spec AR-15 upper receivers as well. However, they may not be compatible with billet upper receivers due to indexing tabs.
Please note: The ATLAS Handguards are NOT compatible with Aero’s M4E1 Enhanced Upper Receiver.
Out of stock
M5 (.308) ATLAS R-ONE M-LOK HANDGUARD
Aero is excited to announce clear anodize parts and components! These parts feature a Type 3 hard coat finish that is applied without any dye during the anodizing process. Something to note about these is color variance between different materials- long story short 7000 series aluminum (receivers, chassis center sections, chassis stocks) show up with a more gold/yellow hue; whereas 6000 series aluminum (handguards) anodizes a more slate grey color. What these color variations leave you with is a visually appealing contrast that has gained a cult following over the years. Clear anodize being as light as it is also makes an amazing base for your next rattle can finish if you are into that type of thing!
NOTE: This part features a colored anodized finish. These finishes are held to different aesthetic standards than parts finished in black anodizing or Cerakote. The lighter coloring allows certain aesthetic marks on the material to be visible through the finish. Some may show more or fewer signs of these defects, but the parts are guaranteed to be quality and in spec. There are also slight color variances between different materials when colored anodizing is applied. For more information on colored anodizing visit our Knowledge Center.
ATLAS
The new Aero Taper Lock Attachment System (ATLAS) is both functional and aesthetically pleasing. It features 2 mirrored tapered locking nuts that provide evenly distributed clamping pressure across a custom engineered barrel nut with use of a turnbuckle screw. A ratcheting detent further secures the design while providing positive registration during installation. By design, the even pressure of the ATLAS system avoids distortion of the handguard often seen with current applications during installation.
All hardware mounting parts are included with the purchase of an ATLAS Handguard.
Lightweight By Design
Features:
ATLAS Handguards are designed to match seamlessly with Aero’s M4E1 Threaded Upper Receivers. Additionally, they are compatible with any Mil-Spec AR-15 upper receivers as well. However, they may not be compatible with billet upper receivers due to indexing tabs.
Please note: The ATLAS Handguards are NOT compatible with Aero’s M4E1 Enhanced Upper Receiver.
| Weight | 2 lbs |
|---|---|
| Material | Aluminum |
| Color | Clear |
| Make | AR .308 |
| Type | M-LOK |
| Make/Model | AR .308 |
| Length | 15'' |
We stock both premium factory-new components and high-quality once-fired brass. Please check the specific product listing title and description carefully; once-fired brass is fully inspected, but we always recommend resizing and inspecting prior to priming and powder charging.
Our standard reloading dies and case length trimmer accessories utilize industry-standard threads (typically 7/8"-14) compatible with major single-stage, turret, and progressive presses like RCBS, Hornady, Lee Precision, and Dillon. Caliber-specific trim gauges must match your exact brass caliber.
Yes. Non-hazardous reloading equipment (dies, case length trimmers, gauges, and unprimed brass) ships via standard ground carriers with no extra fees. Any orders containing smokeless powders or primers will incur standard federal HazMat handling fees and cannot be shipped via air transportation.
Precision reloading gear is valuable, so all orders are shipped with tracking enabled. As soon as your package is dispatched from our inventory warehouse, a tracking number will be emailed to you. You can monitor your shipment directly on our Track Order page using your unique Order ID.
We accept returns on unused, unaltered tools, case preparation equipment, and unopened component boxes within 30 days of item delivery. Due to safety and strict quality control on the reloading bench, we absolutely cannot accept returns on opened packs of primers, smokeless powder, or processed brass casings.
