BRN-180M STRIPPED LOWER RECEIVER BLACK AMBIDEXTROUS
The Brownells BRN-180M® Lower Receiver is specifically designed to pair up with the BRN-180® Upper Receivers to maximize the full potential of this unique line.
The new BRN-180M is now fully ambidextrous and includes ambidextrous bolt release and an ambidextrous magazine release. The ambidextrous magazine lever was designed to work in conjunction with the standard Mil-spec magazine catch for proper function. The new BRN-180M includes the ambidextrous bolt release and magazine release lever hardware.
While designed to be fully compatible with Mil-Spec lower receiver parts and triggers the BRN-180M® Lower Receiver does away with the traditional receiver extension threads and in their place has a milled in 1913 Picatinny rail section for mounting of Sig Sauer® MCX style stocks.
This Lower Receiver is made from billet 7075 T-6 aluminum with a hard-anodized finish, has integral oversized trigger guard, and the unique features of a threaded bolt catch pin and captive set screw for the takedown pin detent spring, both included.
Due to the proprietary design nature of the BRN-180M® Lower Receiver it will not function with standard AR-15 upper receivers.
Bolt catch screw, ambi-magazine release lever screw and ambi-bolt catch lever screw are all installed/removed with 1/16" allen. Take down detent capture screw = 0.050" allen. There is a tensioning screw to put pressure on the take down pin upper receiver lug = 1/8" allen
FFL Restriction:
You must be 18 years of age or older to purchase rifles and shotguns, and 21 or older to purchase handguns, receivers, frames, and suppressors. Minimum age requirements may vary by state. Check your state and local laws before ordering. It is your responsibility to fully understand the laws in your area and to ensure that possession of this item would not violate any applicable state or local laws. This product must be delivered to a Federal Firearms License holder.
Original price was: $299.99.$224.99Current price is: $224.99.
BRN-180M STRIPPED LOWER RECEIVER BLACK AMBIDEXTROUS
The Brownells BRN-180M® Lower Receiver is specifically designed to pair up with the BRN-180® Upper Receivers to maximize the full potential of this unique line.
The new BRN-180M is now fully ambidextrous and includes ambidextrous bolt release and an ambidextrous magazine release. The ambidextrous magazine lever was designed to work in conjunction with the standard Mil-spec magazine catch for proper function. The new BRN-180M includes the ambidextrous bolt release and magazine release lever hardware.
While designed to be fully compatible with Mil-Spec lower receiver parts and triggers the BRN-180M® Lower Receiver does away with the traditional receiver extension threads and in their place has a milled in 1913 Picatinny rail section for mounting of Sig Sauer® MCX style stocks.
This Lower Receiver is made from billet 7075 T-6 aluminum with a hard-anodized finish, has integral oversized trigger guard, and the unique features of a threaded bolt catch pin and captive set screw for the takedown pin detent spring, both included.
Due to the proprietary design nature of the BRN-180M® Lower Receiver it will not function with standard AR-15 upper receivers.
Bolt catch screw, ambi-magazine release lever screw and ambi-bolt catch lever screw are all installed/removed with 1/16" allen. Take down detent capture screw = 0.050" allen. There is a tensioning screw to put pressure on the take down pin upper receiver lug = 1/8" allen
FFL Restriction:
You must be 18 years of age or older to purchase rifles and shotguns, and 21 or older to purchase handguns, receivers, frames, and suppressors. Minimum age requirements may vary by state. Check your state and local laws before ordering. It is your responsibility to fully understand the laws in your area and to ensure that possession of this item would not violate any applicable state or local laws. This product must be delivered to a Federal Firearms License holder.
Out of stock
BRN-180M STRIPPED LOWER RECEIVER BLACK AMBIDEXTROUS
The Brownells BRN-180M® Lower Receiver is specifically designed to pair up with the BRN-180® Upper Receivers to maximize the full potential of this unique line.
The new BRN-180M is now fully ambidextrous and includes ambidextrous bolt release and an ambidextrous magazine release. The ambidextrous magazine lever was designed to work in conjunction with the standard Mil-spec magazine catch for proper function. The new BRN-180M includes the ambidextrous bolt release and magazine release lever hardware.
While designed to be fully compatible with Mil-Spec lower receiver parts and triggers the BRN-180M® Lower Receiver does away with the traditional receiver extension threads and in their place has a milled in 1913 Picatinny rail section for mounting of Sig Sauer® MCX style stocks.
This Lower Receiver is made from billet 7075 T-6 aluminum with a hard-anodized finish, has integral oversized trigger guard, and the unique features of a threaded bolt catch pin and captive set screw for the takedown pin detent spring, both included.
Due to the proprietary design nature of the BRN-180M® Lower Receiver it will not function with standard AR-15 upper receivers.
Bolt catch screw, ambi-magazine release lever screw and ambi-bolt catch lever screw are all installed/removed with 1/16" allen. Take down detent capture screw = 0.050" allen. There is a tensioning screw to put pressure on the take down pin upper receiver lug = 1/8" allen
FFL Restriction:
You must be 18 years of age or older to purchase rifles and shotguns, and 21 or older to purchase handguns, receivers, frames, and suppressors. Minimum age requirements may vary by state. Check your state and local laws before ordering. It is your responsibility to fully understand the laws in your area and to ensure that possession of this item would not violate any applicable state or local laws. This product must be delivered to a Federal Firearms License holder.
| Weight | .8 lbs |
|---|---|
| Make/Model | Brownells, BRN-180M |
| Model | BRN-180M |
| Finish | Anodized |
| Color | Black |
| Cartridge | AKK_5.56 x 45 |
| Make | Brownells |
| Style | Stripped |
We stock both premium factory-new components and high-quality once-fired brass. Please check the specific product listing title and description carefully; once-fired brass is fully inspected, but we always recommend resizing and inspecting prior to priming and powder charging.
Our standard reloading dies and case length trimmer accessories utilize industry-standard threads (typically 7/8"-14) compatible with major single-stage, turret, and progressive presses like RCBS, Hornady, Lee Precision, and Dillon. Caliber-specific trim gauges must match your exact brass caliber.
Yes. Non-hazardous reloading equipment (dies, case length trimmers, gauges, and unprimed brass) ships via standard ground carriers with no extra fees. Any orders containing smokeless powders or primers will incur standard federal HazMat handling fees and cannot be shipped via air transportation.
Precision reloading gear is valuable, so all orders are shipped with tracking enabled. As soon as your package is dispatched from our inventory warehouse, a tracking number will be emailed to you. You can monitor your shipment directly on our Track Order page using your unique Order ID.
We accept returns on unused, unaltered tools, case preparation equipment, and unopened component boxes within 30 days of item delivery. Due to safety and strict quality control on the reloading bench, we absolutely cannot accept returns on opened packs of primers, smokeless powder, or processed brass casings.
