COMPETITION BOLT 2.0 FOR 10/22 - COMPETITION BOLT 2.0 FOR 10/22

COMPETITION BOLT 2.0 FOR 10/22 – COMPETITION BOLT 2.0 FOR 10/22

[cfs_specs_box]

Description

VOLQUARTSEN COMPETITION BOLT 2.0 FOR 10/22

Complete CNC-Machined Bolt features our hardened and tuned extractor for positive, consistent extraction. It also includes our round titanium firing pin. This round design eliminates the unnecessary movement found on most 10/22 firing pins. The CNC-machining process allows us to hold the head spacing to exact dimensions eliminating the need to have your factory bolt reworked.

FEATURES

Case hardened with DLC coating applied – a high performance premium finish that offers many advantages.
Recoil buffer included
Features the same improved [Firing Pin](/inventory_configurations/821) and [Extractor](/inventory_configurations/822) as our complete rifles
In the T/CR22, this bolt is only compatible with our TG2000 Trigger Group
Increased hardness
Low residual stress
Increased lubricity
Low coefficient of friction
Improved wear resistance
Requires much less lubrication

**NOTE: These are designed to work with Volquartsen aftermarket receivers as well as factory Ruger receivers, but may not be compatible with other aftermarket receivers**

Description

Original price was: $270.00.Current price is: $200.57.

VOLQUARTSEN COMPETITION BOLT 2.0 FOR 10/22

Complete CNC-Machined Bolt features our hardened and tuned extractor for positive, consistent extraction. It also includes our round titanium firing pin. This round design eliminates the unnecessary movement found on most 10/22 firing pins. The CNC-machining process allows us to hold the head spacing to exact dimensions eliminating the need to have your factory bolt reworked.

FEATURES

Case hardened with DLC coating applied – a high performance premium finish that offers many advantages.
Recoil buffer included
Features the same improved [Firing Pin](/inventory_configurations/821) and [Extractor](/inventory_configurations/822) as our complete rifles
In the T/CR22, this bolt is only compatible with our TG2000 Trigger Group
Increased hardness
Low residual stress
Increased lubricity
Low coefficient of friction
Improved wear resistance
Requires much less lubrication

**NOTE: These are designed to work with Volquartsen aftermarket receivers as well as factory Ruger receivers, but may not be compatible with other aftermarket receivers**

Out of stock

SKU 430116571 Category Rifle Parts

Description
Additional information

Description

VOLQUARTSEN COMPETITION BOLT 2.0 FOR 10/22

Complete CNC-Machined Bolt features our hardened and tuned extractor for positive, consistent extraction. It also includes our round titanium firing pin. This round design eliminates the unnecessary movement found on most 10/22 firing pins. The CNC-machining process allows us to hold the head spacing to exact dimensions eliminating the need to have your factory bolt reworked.

FEATURES

Case hardened with DLC coating applied – a high performance premium finish that offers many advantages.
Recoil buffer included
Features the same improved [Firing Pin](/inventory_configurations/821) and [Extractor](/inventory_configurations/822) as our complete rifles
In the T/CR22, this bolt is only compatible with our TG2000 Trigger Group
Increased hardness
Low residual stress
Increased lubricity
Low coefficient of friction
Improved wear resistance
Requires much less lubrication

**NOTE: These are designed to work with Volquartsen aftermarket receivers as well as factory Ruger receivers, but may not be compatible with other aftermarket receivers**

Additional information

Weight	.5 lbs
Finish	Black
Model	10/22
Make	Ruger
Cartridge	AFF_22 Long Rifle
Make/Model	Ruger, 10/22
Hand	Right

Frequently Asked Questions

Are these brass cases and reloading components factory-new or once-fired? +

We stock both premium factory-new components and high-quality once-fired brass. Please check the specific product listing title and description carefully; once-fired brass is fully inspected, but we always recommend resizing and inspecting prior to priming and powder charging.

Will this case trimmer gauge or die set work with my progressive press setup? +

Our standard reloading dies and case length trimmer accessories utilize industry-standard threads (typically 7/8"-14) compatible with major single-stage, turret, and progressive presses like RCBS, Hornady, Lee Precision, and Dillon. Caliber-specific trim gauges must match your exact brass caliber.

Do you enforce shipping restrictions on powder, primers, or live ammunition? +

Yes. Non-hazardous reloading equipment (dies, case length trimmers, gauges, and unprimed brass) ships via standard ground carriers with no extra fees. Any orders containing smokeless powders or primers will incur standard federal HazMat handling fees and cannot be shipped via air transportation.

How can I track my shipment to ensure delivery safety? +

Precision reloading gear is valuable, so all orders are shipped with tracking enabled. As soon as your package is dispatched from our inventory warehouse, a tracking number will be emailed to you. You can monitor your shipment directly on our Track Order page using your unique Order ID.

Can I return precision measuring tools or die components if they don’t fit? +

We accept returns on unused, unaltered tools, case preparation equipment, and unopened component boxes within 30 days of item delivery. Due to safety and strict quality control on the reloading bench, we absolutely cannot accept returns on opened packs of primers, smokeless powder, or processed brass casings.

You may also like...