ROMEO-M17 RED DOT SIGHT – ROMEO-M17 2 MOA DOT/32 MOA CIRCLE RETICLE COYOTE

Description

Original price was: $699.99.Current price is: $546.09.

FEATURES:

  • A fully enclosed, sealed and purged optical system, for ultimate protection from the elements
  • Mounts from underneath the pistol slide, re-using the MHS pistol rear sight block
  • 7075 Aluminum housing with integrated gas deflector on the front of the housing, and machined anti-reflection grooves on all rear surfaces for reduced glare
  • Extremely low deck height, allowing a full sight picture and co-witness with standard-height sights
  • SIG-LOCTM (SIG Leverage Optimizing Connection) proprietary mounting interface, for the ultimate optic/pistol lockup
  • A high-efficiency point source LED emitter, with 2 MOA dot/32 MOA circle reticle. The reticles are independently selectable (circle only, dot only, or circle/dot combination).
  • Independent brightness adjustment buttons that are recessed within a protective plate but which can be activated even with gloves on. Buttons have bump features above UP and below DOWN, so they can be determined by feel.
  • 15 brightness settings, with 3 of the settings optimized for use with Gen 3+ NV devices
  • A side-mounted CR2032 battery compartment with a threaded battery cap, for easy battery changes without the need to remove the optic from the firearm. The cap is slotted and knurled, for use with or without tools.
  • Minimum continuous runtime of 50,000 hours, at medium brightness setting ` MOTAC (Motion Activated Illumination)
  • MAGNETAC (Magnetic Activation)
  • D.A.R.C. (Dark Adaptive Reticles & Coatings)
  • Designed, developed, tested and fully assembled in the USA

3 in stock

SKU 430105840 Category

Description

FEATURES:

  • A fully enclosed, sealed and purged optical system, for ultimate protection from the elements
  • Mounts from underneath the pistol slide, re-using the MHS pistol rear sight block
  • 7075 Aluminum housing with integrated gas deflector on the front of the housing, and machined anti-reflection grooves on all rear surfaces for reduced glare
  • Extremely low deck height, allowing a full sight picture and co-witness with standard-height sights
  • SIG-LOCTM (SIG Leverage Optimizing Connection) proprietary mounting interface, for the ultimate optic/pistol lockup
  • A high-efficiency point source LED emitter, with 2 MOA dot/32 MOA circle reticle. The reticles are independently selectable (circle only, dot only, or circle/dot combination).
  • Independent brightness adjustment buttons that are recessed within a protective plate but which can be activated even with gloves on. Buttons have bump features above UP and below DOWN, so they can be determined by feel.
  • 15 brightness settings, with 3 of the settings optimized for use with Gen 3+ NV devices
  • A side-mounted CR2032 battery compartment with a threaded battery cap, for easy battery changes without the need to remove the optic from the firearm. The cap is slotted and knurled, for use with or without tools.
  • Minimum continuous runtime of 50,000 hours, at medium brightness setting ` MOTAC (Motion Activated Illumination)
  • MAGNETAC (Magnetic Activation)
  • D.A.R.C. (Dark Adaptive Reticles & Coatings)
  • Designed, developed, tested and fully assembled in the USA

Additional information

Weight 1 lbs
Power Supply

CR 2032

Mount

Direct

Finish

Coyote Tan

Brightness Settings

15 Settings

Reticle

32 MOA Circle, 2 MOA Dot

Night Vision Compatible

Yes

Click Value

1.5 MOA

Weight

0.094 lbs

Frequently Asked Questions

Are these brass cases and reloading components factory-new or once-fired? +

We stock both premium factory-new components and high-quality once-fired brass. Please check the specific product listing title and description carefully; once-fired brass is fully inspected, but we always recommend resizing and inspecting prior to priming and powder charging.

Will this case trimmer gauge or die set work with my progressive press setup? +

Our standard reloading dies and case length trimmer accessories utilize industry-standard threads (typically 7/8"-14) compatible with major single-stage, turret, and progressive presses like RCBS, Hornady, Lee Precision, and Dillon. Caliber-specific trim gauges must match your exact brass caliber.

Do you enforce shipping restrictions on powder, primers, or live ammunition? +

Yes. Non-hazardous reloading equipment (dies, case length trimmers, gauges, and unprimed brass) ships via standard ground carriers with no extra fees. Any orders containing smokeless powders or primers will incur standard federal HazMat handling fees and cannot be shipped via air transportation.

How can I track my shipment to ensure delivery safety? +

Precision reloading gear is valuable, so all orders are shipped with tracking enabled. As soon as your package is dispatched from our inventory warehouse, a tracking number will be emailed to you. You can monitor your shipment directly on our Track Order page using your unique Order ID.

Can I return precision measuring tools or die components if they don’t fit? +

We accept returns on unused, unaltered tools, case preparation equipment, and unopened component boxes within 30 days of item delivery. Due to safety and strict quality control on the reloading bench, we absolutely cannot accept returns on opened packs of primers, smokeless powder, or processed brass casings.