SLiP 2000 3-Pack contains 2 fl. oz. bottles of 725 Gun Cleaner/ Degreaser, Carbon Killer, and Gun Lube.
725 Gun Cleaner/Degreaser is a water-based solvent that strips grease, oil, Cosmoline, carbon, and grime from gun parts. Safe for aluminum, carbon steel, and stainless, and won’t harm plastic, bluing, sealed wood, or rubber. Use in parts washers, ultra sonic cleaners (check with manufacturer) or apply by hand. Lubricate exposed metal after use.
Carbon Killer dissolves burnt-on carbon and flushes away powder residue. Soak the item to be cleaned in Carbon Killer for 5 to 15 minutes to loosen tough carbon fouling on bolts, cylinder faces, actions, muzzle brakes, and other hard-to-reach areas. Then simply wipe, brush, or rinse the part clean. Use for bore cleaning to remove carbon, lead, and plastic wad fouling. Carbon Killer is reusable; if stored properly, it can maintain its strength through multiple cleaning sessions. No hazardous chemicals, nonflammable, and biodegradable.
Gun Lube keeps your gun running in extreme conditions. Won’t become sticky or slow down at cold temperatures and doesn’t freeze, even at -110°F. Heat has no effect, because Gun Lube doesn’t evaporate and won’t burn off up to +1,250°F. Won’t attract dirt, dust, or sand, either, and it displaces moisture. Gun Lube penetrates into the micro-pores of the metal to create a bonded surface that resists carbon, copper, lead, plastic and other fouling for easy cleaning. Contains no petroleum distillates or oil.
Original price was: $19.99.$17.99Current price is: $17.99.
SLiP 2000 3-Pack contains 2 fl. oz. bottles of 725 Gun Cleaner/ Degreaser, Carbon Killer, and Gun Lube.
725 Gun Cleaner/Degreaser is a water-based solvent that strips grease, oil, Cosmoline, carbon, and grime from gun parts. Safe for aluminum, carbon steel, and stainless, and won’t harm plastic, bluing, sealed wood, or rubber. Use in parts washers, ultra sonic cleaners (check with manufacturer) or apply by hand. Lubricate exposed metal after use.
Carbon Killer dissolves burnt-on carbon and flushes away powder residue. Soak the item to be cleaned in Carbon Killer for 5 to 15 minutes to loosen tough carbon fouling on bolts, cylinder faces, actions, muzzle brakes, and other hard-to-reach areas. Then simply wipe, brush, or rinse the part clean. Use for bore cleaning to remove carbon, lead, and plastic wad fouling. Carbon Killer is reusable; if stored properly, it can maintain its strength through multiple cleaning sessions. No hazardous chemicals, nonflammable, and biodegradable.
Gun Lube keeps your gun running in extreme conditions. Won’t become sticky or slow down at cold temperatures and doesn’t freeze, even at -110°F. Heat has no effect, because Gun Lube doesn’t evaporate and won’t burn off up to +1,250°F. Won’t attract dirt, dust, or sand, either, and it displaces moisture. Gun Lube penetrates into the micro-pores of the metal to create a bonded surface that resists carbon, copper, lead, plastic and other fouling for easy cleaning. Contains no petroleum distillates or oil.
32 in stock
SLiP 2000 3-Pack contains 2 fl. oz. bottles of 725 Gun Cleaner/ Degreaser, Carbon Killer, and Gun Lube.
725 Gun Cleaner/Degreaser is a water-based solvent that strips grease, oil, Cosmoline, carbon, and grime from gun parts. Safe for aluminum, carbon steel, and stainless, and won’t harm plastic, bluing, sealed wood, or rubber. Use in parts washers, ultra sonic cleaners (check with manufacturer) or apply by hand. Lubricate exposed metal after use.
Carbon Killer dissolves burnt-on carbon and flushes away powder residue. Soak the item to be cleaned in Carbon Killer for 5 to 15 minutes to loosen tough carbon fouling on bolts, cylinder faces, actions, muzzle brakes, and other hard-to-reach areas. Then simply wipe, brush, or rinse the part clean. Use for bore cleaning to remove carbon, lead, and plastic wad fouling. Carbon Killer is reusable; if stored properly, it can maintain its strength through multiple cleaning sessions. No hazardous chemicals, nonflammable, and biodegradable.
Gun Lube keeps your gun running in extreme conditions. Won’t become sticky or slow down at cold temperatures and doesn’t freeze, even at -110°F. Heat has no effect, because Gun Lube doesn’t evaporate and won’t burn off up to +1,250°F. Won’t attract dirt, dust, or sand, either, and it displaces moisture. Gun Lube penetrates into the micro-pores of the metal to create a bonded surface that resists carbon, copper, lead, plastic and other fouling for easy cleaning. Contains no petroleum distillates or oil.
| Weight | .5 lbs |
|---|---|
| Size | 2 oz |
We stock both premium factory-new components and high-quality once-fired brass. Please check the specific product listing title and description carefully; once-fired brass is fully inspected, but we always recommend resizing and inspecting prior to priming and powder charging.
Our standard reloading dies and case length trimmer accessories utilize industry-standard threads (typically 7/8"-14) compatible with major single-stage, turret, and progressive presses like RCBS, Hornady, Lee Precision, and Dillon. Caliber-specific trim gauges must match your exact brass caliber.
Yes. Non-hazardous reloading equipment (dies, case length trimmers, gauges, and unprimed brass) ships via standard ground carriers with no extra fees. Any orders containing smokeless powders or primers will incur standard federal HazMat handling fees and cannot be shipped via air transportation.
Precision reloading gear is valuable, so all orders are shipped with tracking enabled. As soon as your package is dispatched from our inventory warehouse, a tracking number will be emailed to you. You can monitor your shipment directly on our Track Order page using your unique Order ID.
We accept returns on unused, unaltered tools, case preparation equipment, and unopened component boxes within 30 days of item delivery. Due to safety and strict quality control on the reloading bench, we absolutely cannot accept returns on opened packs of primers, smokeless powder, or processed brass casings.
