• +888 888 888
  • Mon - Fri: 9:00 - 18:30
  • Home
  • About Us
  • Everything you need to know about reloading
    Start Shopping
      Reloading Dies
      Reloading Presses & Accessories
      Reloading Tools
      Reloading Components
      Powder Handling
      Measuring Tools
      Case Cleaning & Prep
      Bullet Casting
      Shotshell Reloading
  • My Account
  • Track My Order
  • Sage Reloading Supply
  • Contact
  • Home
  • About Us
  • Everything you need to know about reloading
    Start Shopping
      Reloading Dies
      Reloading Presses & Accessories
      Reloading Tools
      Reloading Components
      Powder Handling
      Measuring Tools
      Case Cleaning & Prep
      Bullet Casting
      Shotshell Reloading
  • My Account
  • Track My Order
  • Sage Reloading Supply
  • Contact
GEN 2 SCOPE MOUNTS - 30MM 1.50'' 0 MOA CANTILEVER MOUNT

GEN 2 SCOPE MOUNTS – 30MM 1.50” 0 MOA CANTILEVER MOUNT

GEN 2 SCOPE MOUNTS

A forward offset mount to give proper eye relief specifically for AR platform rifles

  • Heavy duty construction for extreme use
  • 30mm diameter
  • Dual steel locking lugs
  • One-piece long clamp bar will not loosen or shift under heavy use or recoil
  • 1/2" steel locking nuts
  • 30mm Mount Places the scope 1.50 above the top of the rifle allowing for the use of scopes with up to a 56mm objective
  • Constructed from 6061 aluminum, hard coat anodized for a lifetime of service
  • 100% Made in U.S.A. with a lifetime warranty

Technical Specs

  • Works with scopes with up to a 56mm objective
  • 30mm Weight: 8.4oz
  • Overall length: 5.875 in.
  • Width of rings: .85 in.
  • 1” Weight 8.1 oz
  • 1” Overall length: 5.875 in.
  • 1” Width of rings: .85 in.
  • Distance between rings: 2.80 in.
  • Offset from the first ring: 1.40 in.
  • 30mm Distance – top of rail to center line of ring: 1.50 in.
Description

Original price was: $146.95.Current price is: $104.71.

GEN 2 SCOPE MOUNTS

A forward offset mount to give proper eye relief specifically for AR platform rifles

  • Heavy duty construction for extreme use
  • 30mm diameter
  • Dual steel locking lugs
  • One-piece long clamp bar will not loosen or shift under heavy use or recoil
  • 1/2" steel locking nuts
  • 30mm Mount Places the scope 1.50 above the top of the rifle allowing for the use of scopes with up to a 56mm objective
  • Constructed from 6061 aluminum, hard coat anodized for a lifetime of service
  • 100% Made in U.S.A. with a lifetime warranty

Technical Specs

  • Works with scopes with up to a 56mm objective
  • 30mm Weight: 8.4oz
  • Overall length: 5.875 in.
  • Width of rings: .85 in.
  • 1” Weight 8.1 oz
  • 1” Overall length: 5.875 in.
  • 1” Width of rings: .85 in.
  • Distance between rings: 2.80 in.
  • Offset from the first ring: 1.40 in.
  • 30mm Distance – top of rail to center line of ring: 1.50 in.

Out of stock

SKU 100039194 Category

Description

GEN 2 SCOPE MOUNTS

A forward offset mount to give proper eye relief specifically for AR platform rifles

  • Heavy duty construction for extreme use
  • 30mm diameter
  • Dual steel locking lugs
  • One-piece long clamp bar will not loosen or shift under heavy use or recoil
  • 1/2" steel locking nuts
  • 30mm Mount Places the scope 1.50 above the top of the rifle allowing for the use of scopes with up to a 56mm objective
  • Constructed from 6061 aluminum, hard coat anodized for a lifetime of service
  • 100% Made in U.S.A. with a lifetime warranty

Technical Specs

  • Works with scopes with up to a 56mm objective
  • 30mm Weight: 8.4oz
  • Overall length: 5.875 in.
  • Width of rings: .85 in.
  • 1” Weight 8.1 oz
  • 1” Overall length: 5.875 in.
  • 1” Width of rings: .85 in.
  • Distance between rings: 2.80 in.
  • Offset from the first ring: 1.40 in.
  • 30mm Distance – top of rail to center line of ring: 1.50 in.

Additional information

Weight .68 lbs
Material

Aluminum
Color

Black
Style

Offset
Number of Bases

1-Piece
Elevation

0 MOA

Frequently Asked Questions

Are these brass cases and reloading components factory-new or once-fired? +

We stock both premium factory-new components and high-quality once-fired brass. Please check the specific product listing title and description carefully; once-fired brass is fully inspected, but we always recommend resizing and inspecting prior to priming and powder charging.

Will this case trimmer gauge or die set work with my progressive press setup? +

Our standard reloading dies and case length trimmer accessories utilize industry-standard threads (typically 7/8"-14) compatible with major single-stage, turret, and progressive presses like RCBS, Hornady, Lee Precision, and Dillon. Caliber-specific trim gauges must match your exact brass caliber.

Do you enforce shipping restrictions on powder, primers, or live ammunition? +

Yes. Non-hazardous reloading equipment (dies, case length trimmers, gauges, and unprimed brass) ships via standard ground carriers with no extra fees. Any orders containing smokeless powders or primers will incur standard federal HazMat handling fees and cannot be shipped via air transportation.

How can I track my shipment to ensure delivery safety? +

Precision reloading gear is valuable, so all orders are shipped with tracking enabled. As soon as your package is dispatched from our inventory warehouse, a tracking number will be emailed to you. You can monitor your shipment directly on our Track Order page using your unique Order ID.

Can I return precision measuring tools or die components if they don’t fit? +

We accept returns on unused, unaltered tools, case preparation equipment, and unopened component boxes within 30 days of item delivery. Due to safety and strict quality control on the reloading bench, we absolutely cannot accept returns on opened packs of primers, smokeless powder, or processed brass casings.

You may also like...

Related products