Introducing the newest addition to the EGW lineup:
The Hunter series picatinny scope mount. EGW saw the need for a shorter, lighter, heavy duty, picatinny scope mount and this is what they came up with. After countless hours of prototyping and testing, the Hunter mount was born.
Featuring:
7075 T6 aluminum for an extremely durable yet lightweight construction.
Type III hardcoat anodizing protects the mount from whatever nature can throw at it.
Chamfered edges provide a snag free hunt.
A compact overall length sheds 15% of its weight compared to our other Heavy Duty mounts.
This mount comes standard with a bevel on both sides making it ambidextrous.
The bolt pattern on the Remington 700 Long Action mount fits Long Action Remington 700 rifles (example 30-06, 300 Win mag), as well as the 740 and 40x. Despite what you may have heard, the Remington 700 mount will NOT fit your Howa 1500 or Weatherby Vanguard. The bolt pattern is similar, but the remainder of the mount (ejection port, length, etc.) renders it useless on these two guns.
EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. EGW's one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.
They machine these in our shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability.
Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately).
EGW recommends:
When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards.
The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
This mount fits:
Original price was: $62.99.$48.84Current price is: $48.84.
Introducing the newest addition to the EGW lineup:
The Hunter series picatinny scope mount. EGW saw the need for a shorter, lighter, heavy duty, picatinny scope mount and this is what they came up with. After countless hours of prototyping and testing, the Hunter mount was born.
Featuring:
7075 T6 aluminum for an extremely durable yet lightweight construction.
Type III hardcoat anodizing protects the mount from whatever nature can throw at it.
Chamfered edges provide a snag free hunt.
A compact overall length sheds 15% of its weight compared to our other Heavy Duty mounts.
This mount comes standard with a bevel on both sides making it ambidextrous.
The bolt pattern on the Remington 700 Long Action mount fits Long Action Remington 700 rifles (example 30-06, 300 Win mag), as well as the 740 and 40x. Despite what you may have heard, the Remington 700 mount will NOT fit your Howa 1500 or Weatherby Vanguard. The bolt pattern is similar, but the remainder of the mount (ejection port, length, etc.) renders it useless on these two guns.
EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. EGW's one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.
They machine these in our shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability.
Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately).
EGW recommends:
When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards.
The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
This mount fits:
2 in stock
Introducing the newest addition to the EGW lineup:
The Hunter series picatinny scope mount. EGW saw the need for a shorter, lighter, heavy duty, picatinny scope mount and this is what they came up with. After countless hours of prototyping and testing, the Hunter mount was born.
Featuring:
7075 T6 aluminum for an extremely durable yet lightweight construction.
Type III hardcoat anodizing protects the mount from whatever nature can throw at it.
Chamfered edges provide a snag free hunt.
A compact overall length sheds 15% of its weight compared to our other Heavy Duty mounts.
This mount comes standard with a bevel on both sides making it ambidextrous.
The bolt pattern on the Remington 700 Long Action mount fits Long Action Remington 700 rifles (example 30-06, 300 Win mag), as well as the 740 and 40x. Despite what you may have heard, the Remington 700 mount will NOT fit your Howa 1500 or Weatherby Vanguard. The bolt pattern is similar, but the remainder of the mount (ejection port, length, etc.) renders it useless on these two guns.
EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. EGW's one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.
They machine these in our shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability.
Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately).
EGW recommends:
When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards.
The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
This mount fits:
| Weight | .2 lbs |
|---|---|
| Material | Aluminum |
| Style | Picatinny Rail |
| Make/Model | Remington, 700 |
| Elevation | 0 MOA |
| Number of Bases | 1-Piece |
| Model | 700 |
| Color | Black |
| Make | Remington |
We stock both premium factory-new components and high-quality once-fired brass. Please check the specific product listing title and description carefully; once-fired brass is fully inspected, but we always recommend resizing and inspecting prior to priming and powder charging.
Our standard reloading dies and case length trimmer accessories utilize industry-standard threads (typically 7/8"-14) compatible with major single-stage, turret, and progressive presses like RCBS, Hornady, Lee Precision, and Dillon. Caliber-specific trim gauges must match your exact brass caliber.
Yes. Non-hazardous reloading equipment (dies, case length trimmers, gauges, and unprimed brass) ships via standard ground carriers with no extra fees. Any orders containing smokeless powders or primers will incur standard federal HazMat handling fees and cannot be shipped via air transportation.
Precision reloading gear is valuable, so all orders are shipped with tracking enabled. As soon as your package is dispatched from our inventory warehouse, a tracking number will be emailed to you. You can monitor your shipment directly on our Track Order page using your unique Order ID.
We accept returns on unused, unaltered tools, case preparation equipment, and unopened component boxes within 30 days of item delivery. Due to safety and strict quality control on the reloading bench, we absolutely cannot accept returns on opened packs of primers, smokeless powder, or processed brass casings.
