EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.
EGW machines these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability.
Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately).
Recommend:
When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards.
The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
This Mount Fits:
This Mount Does Not Fit:
Browning BAR MK3 DBM – This rifle has integrated picatinny style rails that are not removable
In October 2019 the overall length of this mount was changed from 5.488"" to 5.094"" to accomodate takedown models. If you purchase a mount from a third party seller there is a chance it may be older and not fit your takedown.
*This mount will fit the Benelli R1 Rifles. It will cover the middle hole on their action, but will use the front and back pairs.
***This mount does not fit the BAR ShortTrac Hog Stalker. EGW does not have a mount that works with this application.
EGW has found that older model BLRs may use the long action rail despite the caliber. Please measure your hole spacing to confirm.
Original price was: $44.99.$34.88Current price is: $34.88.
EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.
EGW machines these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability.
Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately).
Recommend:
When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards.
The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
This Mount Fits:
This Mount Does Not Fit:
Browning BAR MK3 DBM – This rifle has integrated picatinny style rails that are not removable
In October 2019 the overall length of this mount was changed from 5.488"" to 5.094"" to accomodate takedown models. If you purchase a mount from a third party seller there is a chance it may be older and not fit your takedown.
*This mount will fit the Benelli R1 Rifles. It will cover the middle hole on their action, but will use the front and back pairs.
***This mount does not fit the BAR ShortTrac Hog Stalker. EGW does not have a mount that works with this application.
EGW has found that older model BLRs may use the long action rail despite the caliber. Please measure your hole spacing to confirm.
5 in stock
EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.
EGW machines these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability.
Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately).
Recommend:
When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards.
The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
This Mount Fits:
This Mount Does Not Fit:
Browning BAR MK3 DBM – This rifle has integrated picatinny style rails that are not removable
In October 2019 the overall length of this mount was changed from 5.488"" to 5.094"" to accomodate takedown models. If you purchase a mount from a third party seller there is a chance it may be older and not fit your takedown.
*This mount will fit the Benelli R1 Rifles. It will cover the middle hole on their action, but will use the front and back pairs.
***This mount does not fit the BAR ShortTrac Hog Stalker. EGW does not have a mount that works with this application.
EGW has found that older model BLRs may use the long action rail despite the caliber. Please measure your hole spacing to confirm.
| Weight | .2 lbs |
|---|---|
| Make/Model | Browning, BLR, Browning, BAR |
| Action Type | Long |
| Make | Browning |
| Style | Picatinny Rail |
| Model | BLR, BAR |
| Elevation | 0 MOA |
| Number of Bases | 1-Piece |
| Material | Aluminum |
| Color | Black |
We stock both premium factory-new components and high-quality once-fired brass. Please check the specific product listing title and description carefully; once-fired brass is fully inspected, but we always recommend resizing and inspecting prior to priming and powder charging.
Our standard reloading dies and case length trimmer accessories utilize industry-standard threads (typically 7/8"-14) compatible with major single-stage, turret, and progressive presses like RCBS, Hornady, Lee Precision, and Dillon. Caliber-specific trim gauges must match your exact brass caliber.
Yes. Non-hazardous reloading equipment (dies, case length trimmers, gauges, and unprimed brass) ships via standard ground carriers with no extra fees. Any orders containing smokeless powders or primers will incur standard federal HazMat handling fees and cannot be shipped via air transportation.
Precision reloading gear is valuable, so all orders are shipped with tracking enabled. As soon as your package is dispatched from our inventory warehouse, a tracking number will be emailed to you. You can monitor your shipment directly on our Track Order page using your unique Order ID.
We accept returns on unused, unaltered tools, case preparation equipment, and unopened component boxes within 30 days of item delivery. Due to safety and strict quality control on the reloading bench, we absolutely cannot accept returns on opened packs of primers, smokeless powder, or processed brass casings.
