OPF-M17, ACRO, RSD is precision machined from 4140 steel, and QPQ coated. Aimpoint ACRO P1/P2 requires the plates to adhere to Aimpoint ACRO TDP with tight tolerances, OPF-M17, ACRO, RSD has proven to be the best choice among professional users.
OPF-M17, ACRO, RSD is compatible with MIL issued M17/M18. It is a drop in adapter for superb Aimpoint ACRO sights. It is identical to the Tangodown SSM-03.
OPF-M17, ACRO, RSD is compatible with P320 X-Five Legion, Legion Carry, and DP Cut. It is not compatible with P320 Pro Cut, P320 sub compact, AXG, and RX.
OPF-M17-ACRO, RSD is shipped with two M4 0.7mm x 6mm (torque value: 20 to 25 in·lb), a T20 key, and a packet of VC-3.
ATTENTION: Steiner MPS users: MPS's recoil lug underneath the sight may vary in width and be slightly wider than that of the ACRO. Should this be the case, firmly push the MPS on the plate, or gently tap on the sight until the MPS fully seats.
For the new M17/M18 and SIG P320 with the Delta Point Pro cut, Forward Controls Design is proud to offer OPF-M17, ACRO, RSD (rear sight dovetail).
Original price was: $80.75.$59.30Current price is: $59.30.
OPF-M17, ACRO, RSD is precision machined from 4140 steel, and QPQ coated. Aimpoint ACRO P1/P2 requires the plates to adhere to Aimpoint ACRO TDP with tight tolerances, OPF-M17, ACRO, RSD has proven to be the best choice among professional users.
OPF-M17, ACRO, RSD is compatible with MIL issued M17/M18. It is a drop in adapter for superb Aimpoint ACRO sights. It is identical to the Tangodown SSM-03.
OPF-M17, ACRO, RSD is compatible with P320 X-Five Legion, Legion Carry, and DP Cut. It is not compatible with P320 Pro Cut, P320 sub compact, AXG, and RX.
OPF-M17-ACRO, RSD is shipped with two M4 0.7mm x 6mm (torque value: 20 to 25 in·lb), a T20 key, and a packet of VC-3.
ATTENTION: Steiner MPS users: MPS's recoil lug underneath the sight may vary in width and be slightly wider than that of the ACRO. Should this be the case, firmly push the MPS on the plate, or gently tap on the sight until the MPS fully seats.
For the new M17/M18 and SIG P320 with the Delta Point Pro cut, Forward Controls Design is proud to offer OPF-M17, ACRO, RSD (rear sight dovetail).
1 in stock
OPF-M17, ACRO, RSD is precision machined from 4140 steel, and QPQ coated. Aimpoint ACRO P1/P2 requires the plates to adhere to Aimpoint ACRO TDP with tight tolerances, OPF-M17, ACRO, RSD has proven to be the best choice among professional users.
OPF-M17, ACRO, RSD is compatible with MIL issued M17/M18. It is a drop in adapter for superb Aimpoint ACRO sights. It is identical to the Tangodown SSM-03.
OPF-M17, ACRO, RSD is compatible with P320 X-Five Legion, Legion Carry, and DP Cut. It is not compatible with P320 Pro Cut, P320 sub compact, AXG, and RX.
OPF-M17-ACRO, RSD is shipped with two M4 0.7mm x 6mm (torque value: 20 to 25 in·lb), a T20 key, and a packet of VC-3.
ATTENTION: Steiner MPS users: MPS's recoil lug underneath the sight may vary in width and be slightly wider than that of the ACRO. Should this be the case, firmly push the MPS on the plate, or gently tap on the sight until the MPS fully seats.
For the new M17/M18 and SIG P320 with the Delta Point Pro cut, Forward Controls Design is proud to offer OPF-M17, ACRO, RSD (rear sight dovetail).
| Weight | 2.24 lbs |
|---|---|
| Make | Sig Sauer |
| Make/Model | Sig Sauer, P320 M18, Sig Sauer, P320 M17 |
| Height | 0.24'' |
| Model | P320 M18, P320 M17 |
| Weight | 1.3 lbs |
| Color | Black |
| Fits / Used For | Aimpoint ARCO |
We stock both premium factory-new components and high-quality once-fired brass. Please check the specific product listing title and description carefully; once-fired brass is fully inspected, but we always recommend resizing and inspecting prior to priming and powder charging.
Our standard reloading dies and case length trimmer accessories utilize industry-standard threads (typically 7/8"-14) compatible with major single-stage, turret, and progressive presses like RCBS, Hornady, Lee Precision, and Dillon. Caliber-specific trim gauges must match your exact brass caliber.
Yes. Non-hazardous reloading equipment (dies, case length trimmers, gauges, and unprimed brass) ships via standard ground carriers with no extra fees. Any orders containing smokeless powders or primers will incur standard federal HazMat handling fees and cannot be shipped via air transportation.
Precision reloading gear is valuable, so all orders are shipped with tracking enabled. As soon as your package is dispatched from our inventory warehouse, a tracking number will be emailed to you. You can monitor your shipment directly on our Track Order page using your unique Order ID.
We accept returns on unused, unaltered tools, case preparation equipment, and unopened component boxes within 30 days of item delivery. Due to safety and strict quality control on the reloading bench, we absolutely cannot accept returns on opened packs of primers, smokeless powder, or processed brass casings.
