MOUNT COMPATIBILITY: 1913 Picatinny
RED DOT COMPATIBILITY:
Aimpoint Micro Standard
C-MORE, DELTAPOINT PRO, DOCTER/NOBLEX, RMR STANDARD, SHIELD STANDARD & all SIG SAUER Open Reflex Sights
WARNING:
When using screws provided in the package, there is always a chance of hardware marring your optic housing finish/coating
Be careful and use your best judgment on which hardware to use for your specific setup
All installations should only be done by a certified professional gunsmith and properly tested to pass all safe and function tests
Torque: Do not exceed 15 in/lbs (1.69 nM) for the Picatinny mount screw
DISCLAIMER: "Aimpoint" is a federally registered trademarks of Aimpoint Inc. and are one of many trademarks owned by Aimpoint Inc. Neither Strike Industries Inc nor this site are affiliated in any manner with, or otherwise endorsed by, Aimpoint Inc. The use of "Aimpoint" on this page is merely to advertise the sale of Aimpoint parts, or components.
-CALIFORNIA PROPOSITION 65 WARNING:-
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
Original price was: $71.95.$62.21Current price is: $62.21.
MOUNT COMPATIBILITY: 1913 Picatinny
RED DOT COMPATIBILITY:
Aimpoint Micro Standard
C-MORE, DELTAPOINT PRO, DOCTER/NOBLEX, RMR STANDARD, SHIELD STANDARD & all SIG SAUER Open Reflex Sights
WARNING:
When using screws provided in the package, there is always a chance of hardware marring your optic housing finish/coating
Be careful and use your best judgment on which hardware to use for your specific setup
All installations should only be done by a certified professional gunsmith and properly tested to pass all safe and function tests
Torque: Do not exceed 15 in/lbs (1.69 nM) for the Picatinny mount screw
DISCLAIMER: "Aimpoint" is a federally registered trademarks of Aimpoint Inc. and are one of many trademarks owned by Aimpoint Inc. Neither Strike Industries Inc nor this site are affiliated in any manner with, or otherwise endorsed by, Aimpoint Inc. The use of "Aimpoint" on this page is merely to advertise the sale of Aimpoint parts, or components.
-CALIFORNIA PROPOSITION 65 WARNING:-
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
3 in stock
MOUNT COMPATIBILITY: 1913 Picatinny
RED DOT COMPATIBILITY:
Aimpoint Micro Standard
C-MORE, DELTAPOINT PRO, DOCTER/NOBLEX, RMR STANDARD, SHIELD STANDARD & all SIG SAUER Open Reflex Sights
WARNING:
When using screws provided in the package, there is always a chance of hardware marring your optic housing finish/coating
Be careful and use your best judgment on which hardware to use for your specific setup
All installations should only be done by a certified professional gunsmith and properly tested to pass all safe and function tests
Torque: Do not exceed 15 in/lbs (1.69 nM) for the Picatinny mount screw
DISCLAIMER: "Aimpoint" is a federally registered trademarks of Aimpoint Inc. and are one of many trademarks owned by Aimpoint Inc. Neither Strike Industries Inc nor this site are affiliated in any manner with, or otherwise endorsed by, Aimpoint Inc. The use of "Aimpoint" on this page is merely to advertise the sale of Aimpoint parts, or components.
-CALIFORNIA PROPOSITION 65 WARNING:-
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
| Weight | .2 lbs |
|---|---|
| Material | Stainless Steel |
| Color | Black |
We stock both premium factory-new components and high-quality once-fired brass. Please check the specific product listing title and description carefully; once-fired brass is fully inspected, but we always recommend resizing and inspecting prior to priming and powder charging.
Our standard reloading dies and case length trimmer accessories utilize industry-standard threads (typically 7/8"-14) compatible with major single-stage, turret, and progressive presses like RCBS, Hornady, Lee Precision, and Dillon. Caliber-specific trim gauges must match your exact brass caliber.
Yes. Non-hazardous reloading equipment (dies, case length trimmers, gauges, and unprimed brass) ships via standard ground carriers with no extra fees. Any orders containing smokeless powders or primers will incur standard federal HazMat handling fees and cannot be shipped via air transportation.
Precision reloading gear is valuable, so all orders are shipped with tracking enabled. As soon as your package is dispatched from our inventory warehouse, a tracking number will be emailed to you. You can monitor your shipment directly on our Track Order page using your unique Order ID.
We accept returns on unused, unaltered tools, case preparation equipment, and unopened component boxes within 30 days of item delivery. Due to safety and strict quality control on the reloading bench, we absolutely cannot accept returns on opened packs of primers, smokeless powder, or processed brass casings.
