7.62MM SUPPRESSOR SHROUD FOR 7.62 PRS-1 - 7.62MM SUPPRESSOR SHROUD FOR 7.62 PRS-1 FDE

7.62MM SUPPRESSOR SHROUD FOR 7.62 PRS-1 – 7.62MM SUPPRESSOR SHROUD FOR 7.62 PRS-1 FDE

[cfs_specs_box]

Description

KNIGHT'S ARMAMENT 7.62MM SUPPRESSOR SHROUD FOR 7.62 PRS-1

The KAC suppressor shroud addresses the issues of surface heat resulting from extended firing with a suppressed firearm. The shroud mounts to the specifically-designed locking collar of a QDC suppressor, allowing mounting and removal of the suppressor with the shroud attached. Constructed of aluminum, with an ample circulation gap between the suppressor body and the shroud, the surface of the shroud heats slowly and cools quickly.

Able to reduce the external surface temperature by up to 300 degrees Fahrenheit, the shroud may be covered by other materials to further reduce mirage or contact hazard that would not normally be suitable for suppressor use due to the burn or melt point of those materials. Mechanically secured to the suppressor locking collar, the shroud will not drift or fall off of the suppressor unintentionally, and requires no secondary attachment point to prevent loss during high-volume firing.

SPECS

Length: 8.08”
Compatible with: 7.62 PRS-1 (PN 121568)

Description

Original price was: $228.46.Current price is: $187.64.

KNIGHT'S ARMAMENT 7.62MM SUPPRESSOR SHROUD FOR 7.62 PRS-1

The KAC suppressor shroud addresses the issues of surface heat resulting from extended firing with a suppressed firearm. The shroud mounts to the specifically-designed locking collar of a QDC suppressor, allowing mounting and removal of the suppressor with the shroud attached. Constructed of aluminum, with an ample circulation gap between the suppressor body and the shroud, the surface of the shroud heats slowly and cools quickly.

Able to reduce the external surface temperature by up to 300 degrees Fahrenheit, the shroud may be covered by other materials to further reduce mirage or contact hazard that would not normally be suitable for suppressor use due to the burn or melt point of those materials. Mechanically secured to the suppressor locking collar, the shroud will not drift or fall off of the suppressor unintentionally, and requires no secondary attachment point to prevent loss during high-volume firing.

SPECS

Length: 8.08”
Compatible with: 7.62 PRS-1 (PN 121568)

Out of stock

SKU 430115897 Category Barrels

Description
Additional information

Description

KNIGHT'S ARMAMENT 7.62MM SUPPRESSOR SHROUD FOR 7.62 PRS-1

The KAC suppressor shroud addresses the issues of surface heat resulting from extended firing with a suppressed firearm. The shroud mounts to the specifically-designed locking collar of a QDC suppressor, allowing mounting and removal of the suppressor with the shroud attached. Constructed of aluminum, with an ample circulation gap between the suppressor body and the shroud, the surface of the shroud heats slowly and cools quickly.

Able to reduce the external surface temperature by up to 300 degrees Fahrenheit, the shroud may be covered by other materials to further reduce mirage or contact hazard that would not normally be suitable for suppressor use due to the burn or melt point of those materials. Mechanically secured to the suppressor locking collar, the shroud will not drift or fall off of the suppressor unintentionally, and requires no secondary attachment point to prevent loss during high-volume firing.

SPECS

Length: 8.08”
Compatible with: 7.62 PRS-1 (PN 121568)

Additional information

Weight	.34 lbs
Material	Aluminum
Finish	Flat Dark Earth
Caliber	AAK_30 Caliber (.308)

Frequently Asked Questions

Are these brass cases and reloading components factory-new or once-fired? +

We stock both premium factory-new components and high-quality once-fired brass. Please check the specific product listing title and description carefully; once-fired brass is fully inspected, but we always recommend resizing and inspecting prior to priming and powder charging.

Will this case trimmer gauge or die set work with my progressive press setup? +

Our standard reloading dies and case length trimmer accessories utilize industry-standard threads (typically 7/8"-14) compatible with major single-stage, turret, and progressive presses like RCBS, Hornady, Lee Precision, and Dillon. Caliber-specific trim gauges must match your exact brass caliber.

Do you enforce shipping restrictions on powder, primers, or live ammunition? +

Yes. Non-hazardous reloading equipment (dies, case length trimmers, gauges, and unprimed brass) ships via standard ground carriers with no extra fees. Any orders containing smokeless powders or primers will incur standard federal HazMat handling fees and cannot be shipped via air transportation.

How can I track my shipment to ensure delivery safety? +

Precision reloading gear is valuable, so all orders are shipped with tracking enabled. As soon as your package is dispatched from our inventory warehouse, a tracking number will be emailed to you. You can monitor your shipment directly on our Track Order page using your unique Order ID.

Can I return precision measuring tools or die components if they don’t fit? +

We accept returns on unused, unaltered tools, case preparation equipment, and unopened component boxes within 30 days of item delivery. Due to safety and strict quality control on the reloading bench, we absolutely cannot accept returns on opened packs of primers, smokeless powder, or processed brass casings.

You may also like...