• +888 888 888
  • Mon - Fri: 9:00 - 18:30
  • Home
  • About Us
  • Everything you need to know about reloading
    Start Shopping
      Reloading Dies
      Reloading Presses & Accessories
      Reloading Tools
      Reloading Components
      Powder Handling
      Measuring Tools
      Case Cleaning & Prep
      Bullet Casting
      Shotshell Reloading
  • My Account
  • Track My Order
  • Sage Reloading Supply
  • Contact
  • Home
  • About Us
  • Everything you need to know about reloading
    Start Shopping
      Reloading Dies
      Reloading Presses & Accessories
      Reloading Tools
      Reloading Components
      Powder Handling
      Measuring Tools
      Case Cleaning & Prep
      Bullet Casting
      Shotshell Reloading
  • My Account
  • Track My Order
  • Sage Reloading Supply
  • Contact
RANSOM MASTER GUN CLEANING MAT - RANSOM MASTER GUN CLEANING MAT GRAY

RANSOM MASTER GUN CLEANING MAT – RANSOM MASTER GUN CLEANING MAT GRAY

RANSOM MASTER GUN CLEANING MAT
 
The Ransom Master Mat and the Ransom Mega Mat Are top quality gun cleaning mats. These mats provide a firm, yet cushioned work surface for working on all kinds of precision parts and assemblies. These mats are an ideal surface for disassembling precision mechanisms such as those found in firearms.
 
All Ransom Mats are highly resistant to gun cleaners and lubes including most all petroleum-based solvents, and brake fluids.
 
Measuring 19×11 3/8 inches, the Ransom Master Mat has ribbed compartments and edges at its borders to contain any small parts or fluids that may be spilled in the course of cleaning and repair. It is relatively unaffected by most gun cleaner, carburetor cleaners, paints, varnishes and brake fluids.
 
MAT CARE AND CLEANING
 
Acetone and MEK class solvents will soften the material of the mat if allowed to remain on it for any length of time. Wipe these types of solvents off the surface as soon as possible.
 
To clean your Master or Mega mat, washing with soap and water usually does the trick. Cleaners like rubbing alcohol work well, WD40 has also been noted to clean and or remove smudges, It has been noted spilling your hot coffee on the mat also cleans it. Standard household spray cleaners work well also dish soap is a good choice.
 
SPECIAL NOTES
 
The mat can be burned or stained. Note some things are permanent.
  • Permanent marker is permanent on the mat
  • Stickers are permanent.
  • Hot plates or things over 200 degrees can affect or burn or mar the finish on the mat.
  • Mat material is rated around 350 degrees but some excessive temperatures can affect the mat. Heat is never recommended.
  • Oils or cleaners left on the mat for a long time can also have a stain effect if left on and not cleaned off after use.
OTHER USES
 
The Ransom Master and Mega mats are designed to be used and specifically designed to protect your workbenches and tables while keeping your parts and assemblies organized. Whether you are rebuilding a carburetor, working on a RC car, cleaning a gun, or your wife has an arts and crafts project the Ransom Mats are a valuable tool to have around.
Description

Original price was: $28.99.Current price is: $26.01.

RANSOM MASTER GUN CLEANING MAT
 
The Ransom Master Mat and the Ransom Mega Mat Are top quality gun cleaning mats. These mats provide a firm, yet cushioned work surface for working on all kinds of precision parts and assemblies. These mats are an ideal surface for disassembling precision mechanisms such as those found in firearms.
 
All Ransom Mats are highly resistant to gun cleaners and lubes including most all petroleum-based solvents, and brake fluids.
 
Measuring 19×11 3/8 inches, the Ransom Master Mat has ribbed compartments and edges at its borders to contain any small parts or fluids that may be spilled in the course of cleaning and repair. It is relatively unaffected by most gun cleaner, carburetor cleaners, paints, varnishes and brake fluids.
 
MAT CARE AND CLEANING
 
Acetone and MEK class solvents will soften the material of the mat if allowed to remain on it for any length of time. Wipe these types of solvents off the surface as soon as possible.
 
To clean your Master or Mega mat, washing with soap and water usually does the trick. Cleaners like rubbing alcohol work well, WD40 has also been noted to clean and or remove smudges, It has been noted spilling your hot coffee on the mat also cleans it. Standard household spray cleaners work well also dish soap is a good choice.
 
SPECIAL NOTES
 
The mat can be burned or stained. Note some things are permanent.
  • Permanent marker is permanent on the mat
  • Stickers are permanent.
  • Hot plates or things over 200 degrees can affect or burn or mar the finish on the mat.
  • Mat material is rated around 350 degrees but some excessive temperatures can affect the mat. Heat is never recommended.
  • Oils or cleaners left on the mat for a long time can also have a stain effect if left on and not cleaned off after use.
OTHER USES
 
The Ransom Master and Mega mats are designed to be used and specifically designed to protect your workbenches and tables while keeping your parts and assemblies organized. Whether you are rebuilding a carburetor, working on a RC car, cleaning a gun, or your wife has an arts and crafts project the Ransom Mats are a valuable tool to have around.

27 in stock

SKU 164800000 Category

Description

RANSOM MASTER GUN CLEANING MAT
 
The Ransom Master Mat and the Ransom Mega Mat Are top quality gun cleaning mats. These mats provide a firm, yet cushioned work surface for working on all kinds of precision parts and assemblies. These mats are an ideal surface for disassembling precision mechanisms such as those found in firearms.
 
All Ransom Mats are highly resistant to gun cleaners and lubes including most all petroleum-based solvents, and brake fluids.
 
Measuring 19×11 3/8 inches, the Ransom Master Mat has ribbed compartments and edges at its borders to contain any small parts or fluids that may be spilled in the course of cleaning and repair. It is relatively unaffected by most gun cleaner, carburetor cleaners, paints, varnishes and brake fluids.
 
MAT CARE AND CLEANING
 
Acetone and MEK class solvents will soften the material of the mat if allowed to remain on it for any length of time. Wipe these types of solvents off the surface as soon as possible.
 
To clean your Master or Mega mat, washing with soap and water usually does the trick. Cleaners like rubbing alcohol work well, WD40 has also been noted to clean and or remove smudges, It has been noted spilling your hot coffee on the mat also cleans it. Standard household spray cleaners work well also dish soap is a good choice.
 
SPECIAL NOTES
 
The mat can be burned or stained. Note some things are permanent.
  • Permanent marker is permanent on the mat
  • Stickers are permanent.
  • Hot plates or things over 200 degrees can affect or burn or mar the finish on the mat.
  • Mat material is rated around 350 degrees but some excessive temperatures can affect the mat. Heat is never recommended.
  • Oils or cleaners left on the mat for a long time can also have a stain effect if left on and not cleaned off after use.
OTHER USES
 
The Ransom Master and Mega mats are designed to be used and specifically designed to protect your workbenches and tables while keeping your parts and assemblies organized. Whether you are rebuilding a carburetor, working on a RC car, cleaning a gun, or your wife has an arts and crafts project the Ransom Mats are a valuable tool to have around.

Additional information

Weight 1.25 lbs

Frequently Asked Questions

Are these brass cases and reloading components factory-new or once-fired? +

We stock both premium factory-new components and high-quality once-fired brass. Please check the specific product listing title and description carefully; once-fired brass is fully inspected, but we always recommend resizing and inspecting prior to priming and powder charging.

Will this case trimmer gauge or die set work with my progressive press setup? +

Our standard reloading dies and case length trimmer accessories utilize industry-standard threads (typically 7/8"-14) compatible with major single-stage, turret, and progressive presses like RCBS, Hornady, Lee Precision, and Dillon. Caliber-specific trim gauges must match your exact brass caliber.

Do you enforce shipping restrictions on powder, primers, or live ammunition? +

Yes. Non-hazardous reloading equipment (dies, case length trimmers, gauges, and unprimed brass) ships via standard ground carriers with no extra fees. Any orders containing smokeless powders or primers will incur standard federal HazMat handling fees and cannot be shipped via air transportation.

How can I track my shipment to ensure delivery safety? +

Precision reloading gear is valuable, so all orders are shipped with tracking enabled. As soon as your package is dispatched from our inventory warehouse, a tracking number will be emailed to you. You can monitor your shipment directly on our Track Order page using your unique Order ID.

Can I return precision measuring tools or die components if they don’t fit? +

We accept returns on unused, unaltered tools, case preparation equipment, and unopened component boxes within 30 days of item delivery. Due to safety and strict quality control on the reloading bench, we absolutely cannot accept returns on opened packs of primers, smokeless powder, or processed brass casings.

You may also like...

Related products