This mount was designed for use with the Williams FP-GR TK peep sight.
The corresponding front sight and block from Williams are:
Lyman Globe Front Sight
Williams Rear Sight
This rail is ambidextrous.
This mount is milled on both sides for bolt clearance on left or right handed models.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. EGW's one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.
They machine these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.
Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately).
The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
Original price was: $35.99.$27.91Current price is: $27.91.
This mount was designed for use with the Williams FP-GR TK peep sight.
The corresponding front sight and block from Williams are:
Lyman Globe Front Sight
Williams Rear Sight
This rail is ambidextrous.
This mount is milled on both sides for bolt clearance on left or right handed models.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. EGW's one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.
They machine these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.
Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately).
The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
2 in stock
This mount was designed for use with the Williams FP-GR TK peep sight.
The corresponding front sight and block from Williams are:
Lyman Globe Front Sight
Williams Rear Sight
This rail is ambidextrous.
This mount is milled on both sides for bolt clearance on left or right handed models.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. EGW's one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.
They machine these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.
Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately).
The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
| Weight | .2 lbs |
|---|---|
| Model | Rascal |
| Color | Black |
| Make/Model | Savage Arms, Rascal |
| Material | Aluminum |
| Make | Savage Arms |
| Number of Bases | 1-Piece |
| Style | Picatinny Rail |
| Elevation | 0 MOA |
We stock both premium factory-new components and high-quality once-fired brass. Please check the specific product listing title and description carefully; once-fired brass is fully inspected, but we always recommend resizing and inspecting prior to priming and powder charging.
Our standard reloading dies and case length trimmer accessories utilize industry-standard threads (typically 7/8"-14) compatible with major single-stage, turret, and progressive presses like RCBS, Hornady, Lee Precision, and Dillon. Caliber-specific trim gauges must match your exact brass caliber.
Yes. Non-hazardous reloading equipment (dies, case length trimmers, gauges, and unprimed brass) ships via standard ground carriers with no extra fees. Any orders containing smokeless powders or primers will incur standard federal HazMat handling fees and cannot be shipped via air transportation.
Precision reloading gear is valuable, so all orders are shipped with tracking enabled. As soon as your package is dispatched from our inventory warehouse, a tracking number will be emailed to you. You can monitor your shipment directly on our Track Order page using your unique Order ID.
We accept returns on unused, unaltered tools, case preparation equipment, and unopened component boxes within 30 days of item delivery. Due to safety and strict quality control on the reloading bench, we absolutely cannot accept returns on opened packs of primers, smokeless powder, or processed brass casings.
