The centerfire single-shot rifle has an extensive history among hunters looking for a dependable and accurate game-getter, without having to spend more than necessary for good quality and basic function, and Henry’s line of break-action one-shooters to carry on that history.
Available with matte finish on steel frames and a highly polished finish on hardened brass frames, these elegantly simple rifles feature 22” round barrels, fully adjustable folding leaf rear sight and brass bead front sights Henry uses on their lever actions, a drilled and tapped provision for optional scope use, walnut front and rear furniture, a curved pistol grip wrist and solid rubber recoil pad on the steel versions, a straight English wrist and brass buttplate on the brass rifles, and a non-ejecting case extractor.
These rifles use a familiar locking lever on top of the frame, behind the external hammer spur, to break the barrel open. Henry added their own touch here though- the lever can be pivoted either left or right from its center position to unlock, which works well for both lefties and righties. The action has no external manual safety; it uses a rebounding hammer that can’t touch the firing pin unless the trigger’s deliberately pulled, and an interlock system that doesn’t allow the barrel to open if the hammer’s cocked, or the barrel to close if the hammer’s cocked while it’s open. Quick to load or unload, safe to carry, and simple to operate.
These single-shot rifles are aimed at the challenge of hunting with only one round on board, and hunters who prefer the uncomplicated durability of the design. Make no mistake though- while some might consider a single-shot an entry-level proposition, Henry builds these to the same high standards as all of their fine centerfire rifles, and not to be a budget model in any sense of the word.
Original price was: $477.99.$434.99Current price is: $434.99.
The centerfire single-shot rifle has an extensive history among hunters looking for a dependable and accurate game-getter, without having to spend more than necessary for good quality and basic function, and Henry’s line of break-action one-shooters to carry on that history.
Available with matte finish on steel frames and a highly polished finish on hardened brass frames, these elegantly simple rifles feature 22” round barrels, fully adjustable folding leaf rear sight and brass bead front sights Henry uses on their lever actions, a drilled and tapped provision for optional scope use, walnut front and rear furniture, a curved pistol grip wrist and solid rubber recoil pad on the steel versions, a straight English wrist and brass buttplate on the brass rifles, and a non-ejecting case extractor.
These rifles use a familiar locking lever on top of the frame, behind the external hammer spur, to break the barrel open. Henry added their own touch here though- the lever can be pivoted either left or right from its center position to unlock, which works well for both lefties and righties. The action has no external manual safety; it uses a rebounding hammer that can’t touch the firing pin unless the trigger’s deliberately pulled, and an interlock system that doesn’t allow the barrel to open if the hammer’s cocked, or the barrel to close if the hammer’s cocked while it’s open. Quick to load or unload, safe to carry, and simple to operate.
These single-shot rifles are aimed at the challenge of hunting with only one round on board, and hunters who prefer the uncomplicated durability of the design. Make no mistake though- while some might consider a single-shot an entry-level proposition, Henry builds these to the same high standards as all of their fine centerfire rifles, and not to be a budget model in any sense of the word.
4 in stock
The centerfire single-shot rifle has an extensive history among hunters looking for a dependable and accurate game-getter, without having to spend more than necessary for good quality and basic function, and Henry’s line of break-action one-shooters to carry on that history.
Available with matte finish on steel frames and a highly polished finish on hardened brass frames, these elegantly simple rifles feature 22” round barrels, fully adjustable folding leaf rear sight and brass bead front sights Henry uses on their lever actions, a drilled and tapped provision for optional scope use, walnut front and rear furniture, a curved pistol grip wrist and solid rubber recoil pad on the steel versions, a straight English wrist and brass buttplate on the brass rifles, and a non-ejecting case extractor.
These rifles use a familiar locking lever on top of the frame, behind the external hammer spur, to break the barrel open. Henry added their own touch here though- the lever can be pivoted either left or right from its center position to unlock, which works well for both lefties and righties. The action has no external manual safety; it uses a rebounding hammer that can’t touch the firing pin unless the trigger’s deliberately pulled, and an interlock system that doesn’t allow the barrel to open if the hammer’s cocked, or the barrel to close if the hammer’s cocked while it’s open. Quick to load or unload, safe to carry, and simple to operate.
These single-shot rifles are aimed at the challenge of hunting with only one round on board, and hunters who prefer the uncomplicated durability of the design. Make no mistake though- while some might consider a single-shot an entry-level proposition, Henry builds these to the same high standards as all of their fine centerfire rifles, and not to be a budget model in any sense of the word.
| Weight | 9 lbs |
|---|---|
| Magazine Included | None |
| Rear Sight | Adjustable |
| Make/Model | Henry, Single Shot |
| Stock Material | Walnut |
| Model | Single Shot |
| Front Sight | Bead |
| Capacity | 1-Round |
| Barrel Length | 22'' |
| Magazine Type | NA |
| Weight | 6.69 lbs |
| Action Type | Single Shot |
| Finish | American Walnut |
| Muzzle | Non-Threaded |
| Make | Henry |
| Cartridge | DMC_360 Buckhammer |
| Length | 37.5'' |
We stock both premium factory-new components and high-quality once-fired brass. Please check the specific product listing title and description carefully; once-fired brass is fully inspected, but we always recommend resizing and inspecting prior to priming and powder charging.
Our standard reloading dies and case length trimmer accessories utilize industry-standard threads (typically 7/8"-14) compatible with major single-stage, turret, and progressive presses like RCBS, Hornady, Lee Precision, and Dillon. Caliber-specific trim gauges must match your exact brass caliber.
Yes. Non-hazardous reloading equipment (dies, case length trimmers, gauges, and unprimed brass) ships via standard ground carriers with no extra fees. Any orders containing smokeless powders or primers will incur standard federal HazMat handling fees and cannot be shipped via air transportation.
Precision reloading gear is valuable, so all orders are shipped with tracking enabled. As soon as your package is dispatched from our inventory warehouse, a tracking number will be emailed to you. You can monitor your shipment directly on our Track Order page using your unique Order ID.
We accept returns on unused, unaltered tools, case preparation equipment, and unopened component boxes within 30 days of item delivery. Due to safety and strict quality control on the reloading bench, we absolutely cannot accept returns on opened packs of primers, smokeless powder, or processed brass casings.
