There is a screw in the front of the original mount that is located underneath the handguard. The handguard must be removed and then this screw must also be removed before the original mount can be removed.
Removing the original mount may be a difficult task. Please use caution when removing the original mount and when installing EGW mount. EGW always recommends having their products installed by a competent and qualified gunsmith.
Metric screws are only available with hex heads.
EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.
This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.
EGW machines these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability.
Recommend:
20 MOA – if shooting 500-1000 yards
When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards.
Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately).
The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
Original price was: $80.99.$62.79Current price is: $62.79.
There is a screw in the front of the original mount that is located underneath the handguard. The handguard must be removed and then this screw must also be removed before the original mount can be removed.
Removing the original mount may be a difficult task. Please use caution when removing the original mount and when installing EGW mount. EGW always recommends having their products installed by a competent and qualified gunsmith.
Metric screws are only available with hex heads.
EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.
This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.
EGW machines these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability.
Recommend:
20 MOA – if shooting 500-1000 yards
When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards.
Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately).
The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
Out of stock
There is a screw in the front of the original mount that is located underneath the handguard. The handguard must be removed and then this screw must also be removed before the original mount can be removed.
Removing the original mount may be a difficult task. Please use caution when removing the original mount and when installing EGW mount. EGW always recommends having their products installed by a competent and qualified gunsmith.
Metric screws are only available with hex heads.
EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.
This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.
EGW machines these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability.
Recommend:
20 MOA – if shooting 500-1000 yards
When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards.
Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately).
The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
| Weight | .4 lbs |
|---|---|
| Color | Black |
| Material | Aluminum |
| Model | T3x |
| Make | Tikka |
| Number of Bases | 1-Piece |
| Style | Picatinny Rail |
| Elevation | 20 MOA |
| Make/Model | Tikka, T3x |
We stock both premium factory-new components and high-quality once-fired brass. Please check the specific product listing title and description carefully; once-fired brass is fully inspected, but we always recommend resizing and inspecting prior to priming and powder charging.
Our standard reloading dies and case length trimmer accessories utilize industry-standard threads (typically 7/8"-14) compatible with major single-stage, turret, and progressive presses like RCBS, Hornady, Lee Precision, and Dillon. Caliber-specific trim gauges must match your exact brass caliber.
Yes. Non-hazardous reloading equipment (dies, case length trimmers, gauges, and unprimed brass) ships via standard ground carriers with no extra fees. Any orders containing smokeless powders or primers will incur standard federal HazMat handling fees and cannot be shipped via air transportation.
Precision reloading gear is valuable, so all orders are shipped with tracking enabled. As soon as your package is dispatched from our inventory warehouse, a tracking number will be emailed to you. You can monitor your shipment directly on our Track Order page using your unique Order ID.
We accept returns on unused, unaltered tools, case preparation equipment, and unopened component boxes within 30 days of item delivery. Due to safety and strict quality control on the reloading bench, we absolutely cannot accept returns on opened packs of primers, smokeless powder, or processed brass casings.
