The middle spread is the distance between the two middle holes, center to center, on your receiver. The middle spreads on our Winchester 70 mounts are as follows:
This mount comes standard with a bevel on both sides making it ambidextrous.
EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.
EGW machines these in their shop using their of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.
Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately).
Recommend:
0 MOA – if shooting 0-500 yards
Mounting Hardware is Included
This mount fits:
Original price was: $35.99.$27.91Current price is: $27.91.
The middle spread is the distance between the two middle holes, center to center, on your receiver. The middle spreads on our Winchester 70 mounts are as follows:
This mount comes standard with a bevel on both sides making it ambidextrous.
EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.
EGW machines these in their shop using their of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.
Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately).
Recommend:
0 MOA – if shooting 0-500 yards
Mounting Hardware is Included
This mount fits:
6 in stock
The middle spread is the distance between the two middle holes, center to center, on your receiver. The middle spreads on our Winchester 70 mounts are as follows:
This mount comes standard with a bevel on both sides making it ambidextrous.
EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.
EGW machines these in their shop using their of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.
Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately).
Recommend:
0 MOA – if shooting 0-500 yards
Mounting Hardware is Included
This mount fits:
| Weight | .19 lbs |
|---|---|
| Material | Steel |
| Make | Marlin, Winchester, Sears |
| Model | 53, 670, 70 |
| Color | Black |
| Style | Picatinny Rail |
| Action Type | Long |
| Make/Model | Winchester, 70, Winchester, 670, Sears, 53 |
| Number of Bases | 1-Piece |
| Elevation | 0 MOA |
We stock both premium factory-new components and high-quality once-fired brass. Please check the specific product listing title and description carefully; once-fired brass is fully inspected, but we always recommend resizing and inspecting prior to priming and powder charging.
Our standard reloading dies and case length trimmer accessories utilize industry-standard threads (typically 7/8"-14) compatible with major single-stage, turret, and progressive presses like RCBS, Hornady, Lee Precision, and Dillon. Caliber-specific trim gauges must match your exact brass caliber.
Yes. Non-hazardous reloading equipment (dies, case length trimmers, gauges, and unprimed brass) ships via standard ground carriers with no extra fees. Any orders containing smokeless powders or primers will incur standard federal HazMat handling fees and cannot be shipped via air transportation.
Precision reloading gear is valuable, so all orders are shipped with tracking enabled. As soon as your package is dispatched from our inventory warehouse, a tracking number will be emailed to you. You can monitor your shipment directly on our Track Order page using your unique Order ID.
We accept returns on unused, unaltered tools, case preparation equipment, and unopened component boxes within 30 days of item delivery. Due to safety and strict quality control on the reloading bench, we absolutely cannot accept returns on opened packs of primers, smokeless powder, or processed brass casings.
